E+H FTC260-AA4D1 Minicap Capacitive Point Level Switch
Product Details:
Manufacturer : Endress+Hauser
Product No. :FTC260-AA4D1
https://www.achievers-automation.com More Products
This industrial automation component is supplied for enterprise procurement .Made-to-order and forward delivery are supported, with pricing quoted per inquiry.
To reduce sourcing risk, each order is handled individually with support for model confirmation, condition clarification, and lead time estimation before order placement. Clear quotation terms and consistent communication are provided to help partners manage expectations and complete transactions with confidence. Additional verification or clarification is available when required, supporting professional procurement and long-term cooperation.
The E+H FTC260-AA4D1 belongs to Endress+Hauser Minicap FTC260 series compact capacitive point level switch, designed on capacitance measuring principle for high/low limit point detection of free-flowing bulk solids and low-viscosity liquids with dielectric constant εr≥1.6, maximum particle size up to 30mmEndress+Hauser. This specific AA4D1 variant features R1 EN10226 threaded process connection, 140mm solid PPS rod sensing probe, F14 polyester IP66 housing and SPDT potential-free relay output without field calibration requirement. Built-in active material buildup compensation circuit automatically eliminates measurement drift caused by medium adhesion on probe surface, ensuring stable switching performance under sticky, dusty working conditions. With fully mechanical wear-free internal structure, the unit requires zero routine maintenance and fits non-hazardous industrial environments across food, feed, cement, chemical and grain processing industries.
Detail:
| Parameter Item |
Standard Technical Value |
| Model Number |
FTC260-AA4D1 (E+H Minicap FTC260 Series) |
| Measuring Principle |
Capacitance change detection |
| Minimum Dielectric Constant |
εr ≥ 1.6 |
| Max Measured Particle Size |
30 mm granular bulk solid |
| Output Signal |
SPDT Potential-free Relay Contact (20~253V AC / 20~55V DC) |
| Switch Delay |
Fixed 0.5s switch trigger delay |
| Supply Voltage Range |
AC:20~253V; DC:20~55V |
| Core Function |
Integrated active buildup compensation |
| Calibration Requirement |
No on-site calibration needed after installation |
| Spec Category |
Detailed Technical Parameter |
| Sensing Probe Material |
PPS (Polyphenylene Sulphide, corrosion-resistant) |
| Probe Standard Length |
140 mm (5.51 inch) |
| Process Connection |
R1 Thread per EN10226 Standard |
| Housing Material |
F14 Reinforced Polyester |
| Cable Entry |
M20 Cable Gland |
| Ingress Protection Grade |
IP66 |
| Process Medium Temperature |
-40°C ~ +120°C (-40°F ~ +248°F) |
| Ambient Operating Temperature |
-40°C ~ +70°C (-40°F ~ +158°F) |
| Working Process Pressure |
-1 bar ~ +25 bar abs (-14.5 ~ +360 PSI) |
| Application Area |
Non-explosion non-hazardous industrial zone |
Brand
E+H is a global leader in providing measurement instruments, services, and solutions for the process and laboratory industries. Since its founding in 1953, the company has been committed to enhancing production efficiency, safety, and sustainability through innovative technologies. E+H’s product portfolio covers a wide range of areas, including flow measurement, level measurement, pressure and temperature measurement, analytical instrumentation, and data management. Its solutions are widely used in industries such as chemicals, food and beverage, oil and gas, power generation, and water and wastewater treatment.
Company Introduction:
Achievers Automation Limited has more than 10 years experience in the market of Industrial Automation, specialized in reselling factory sealed Probe, Sensor, DCS,isolator barrier, HMI, PLC,Adapter,Profibus connector and cable from Brands as BENTLY NEVADA, E+H, MTL, AB, Pepperl+Fuchs, YOKOGAWA, ASCO, Schneider, Lenze, Pro-face, Mitsubishi, Omron, Lenze, Delta, IFM etc. If you have any request, please do not hesitate to contact us.
Below are the TOP BRANDS we handle in the past 14 years:
FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have cooperated forwader who can arrange shipment via FedEx, DHL,TNT with good price.
Q:What is the warranty of goods?
A: One-year Warranty.
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews