All Products

Bently Nevada Proximity Probe (54)

Bently Nevada Vibration Monitoring System (29)

Endress+Hauser Instruments (43)

ALLEN BRADLEY PLC Products (73)

PEPPERL FUCHS Isolated Barrier (55)

YOKOGAWA Instruments (52)

MTL Instruments (46)

ASCO Solenoid Valve (21)

Rosemount PH Sensors (12)

AUMA Actuator Parts (9)

ABB Valve Positioner (24)

TELEDYNE Fuel Cell (10)

HONEYWELL Transmitter (14)

VEGA Level Meter (10)

EMERSON TREX Device Communicator (12)

SIEMENS Transmitter (28)

SICK Instruments (53)

SMC Instruments (15)

IFM Sensor (17)

Beckhoff PLC Module (43)

Festo Cylinder & Fittings (39)

I'm Online Chat Now

mtl5575 mtl industries

(37)

MTL5513 MTL Instruments Switch Proximity Detector Interface Safety Barrier Maximum 10.5 V
Contact Now

MTL5513 MTL Instruments Switch/Proximity Detector Interface The MTL5513 enables two solid-state outputs in the safe area to be controlled by two switches or proximity detectors located in the hazardous area. ... Read More

2024-03-29 23:37:52

MTL5576-RTD MTL Instruments | 2ch Temperature converter, RTD
Contact Now

MTL5576-RTD MTL Instruments | 2ch Temperature converter, RTD Detailed Product Description 1.Temperature Input moduleThese modules accept inputs from low-level dc sources such as thermocouples or RTDs in ... Read More

2024-04-09 14:01:02

MTL5514 MTL Switch/Proximity Detector Interface Response time 10ms maximum
Contact Now

MTL5514 MTL Switch/Proximity Detector Interface Description The MTLx514 enables a safearea load to be controlled, through a relay, by a proximity detector or switch located in a hazardous area. Line faults are ... Read More

2024-04-09 14:01:01

MTL4511 MTL Instruments Switch/Proximity Detector Interface 1-channel, with line fault detection
Contact Now

Product Introduction: The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area. When selected, open or short circuit conditions in the field wiring are ... Read More

2025-03-14 15:23:09

MTL4546Y MTL Instruments Isolating Driver For 4–20mA HART Valve Positioners With Line Fault Detection
Contact Now

Product Introduction: The MTLx546 accepts a 4/20mA floating signal from a safe-area controller to drive a current/pressure converter (or any other load up to 800) in a hazardous area. For HART valve positioners... Read More

2024-06-05 17:10:22

MTL4541 MTL Instruments Repeater Power Supply 4/20mA HART 2 Or 3 Wire Transmitters
Contact Now

Product Introduction: The MTLx541 provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a hazardous area, and repeats the current in another ... Read More

2024-06-05 17:10:22

MTL5532 Pulse Isolator MTL Instruments 4/20mA Current Outputs
Contact Now

MTL5532 MTL Instrument Pulse Isolator The MTLx532 isolates pulses from a switch, proximity detector, current pulse transmitter or voltage pulse transmitter located in a hazardous area. It is ideal for ... Read More

2024-01-19 10:45:00

MTL5018 MTL Instruments Proximity Detector Interface Number Of Channels 2
Contact Now

MTL5018 MTL Instruments Proximity Detector Interface The MTL5018 enables two safe-area loads to be controlled by twoswitches or proximity detectors located in a hazardous area. Tworelay outputs are provided. ... Read More

2024-03-28 14:26:53

MTL4531 MTL Inst Vibration Transducer Interface
Contact Now

MTL4531 MTL Instruments Vibration Transducer Interface Description of MTL4531 Vibration Transducer Interface MTL4531 repeats a signal from a vibration sensor in a hazardous area, providing an output for a ... Read More

2024-01-19 10:41:50

TP48-3-N-NDI MTL Instruments 5% To 95% RH (Non-Condensing) 35V Dc Maximum
Contact Now

TP48-3-N-NDI MTL Instruments TP48 Series Surge Protection MTL TP48 range Safeguards electronic process transmitters against induced surges and transients from field cabling Protects 2, 3 and 4 wire transmitters ... Read More

2024-03-29 23:19:14

Page 3 of 4|< << 1 2 3 4 >> >|